MULTIPLUS-2012 Victron Pure Sine Wave Inverter 2000W 12V with Battery Charger UL

Victron 2000W 12V Pure Sine Wave Inverter with built in battery charger

See 1 more picture

RRP:

~~$1,489.00~~

Your Price:

$1,389.00 (You save $100.00)

SKU:

PMP122200102 MultiPlus 12/2000/80-50 120V VE. BUS UL

Weight:

25.00 LBS

Availability:

IN STOCK!~

Shipping:

Calculated at checkout

Product Description

MultiPlus

Multifunctional

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package.

Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology,

plus multiple system integration features.

Unique PowerAssist feature

The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection.

First, battery charging will automatically be reduced when otherwise an overload would occur.

The second level will boost the output of a generator or shore side supply with power taken from the battery.

Remote Monitoring and Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your MultiPlus and system or systems locally (via LAN) or remotely

(via the internet) from anywhere in the world, using the free VRM app and the free VRM portal website. Access can be from a phone, tablet,

laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your MultiPlus to auto starting a backup generator and more…"

Uninterrupted AC power (UPS function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is

automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds)

that computers and other electronic equipment will continue to operate without disruption.

Multifunctional, with intelligent power management:
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge
technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the
MultiPlus has several advanced features, as outlined below.

Parallel operation and three phase capability:
Up to six Multis can operate in parallel to achieve higher power output.
In addition to parallel connection, three units can be configured for three-phase output.
PowerControl - Dealing with limited generator, shore side or grid power
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of
other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being
overloaded.

PowerAssist - Boosting the capacity of shore or generator power:
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the
capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will
make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When
the load reduces, the spare power is used to recharge the battery.

Four stage adaptive charger and dual bank battery charging:
The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software.
The software fine-tunes the three-stage automatic process to suit the condition of the battery, and adds a fourth stage
for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger
datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second
battery using an independent trickle charge output intended for a main engine or generator starter battery.

High start-up power:
Needed to start high in rush loads such as power converters for LED lamps, halogen lamps or electric tools.
Search Mode
When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx.
70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load,
and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will
continue to operate. If not, the inverter will shut down again.

Programmable relay:
By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm
or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).
Remote on / off / charger on

Three pole connector:
On-site system configuring, monitoring and control
After installation, the MultiPlus is ready to go.
Settings which can be changed with DIP switches: battery charge voltage / search mode.
For more settings use VE-Config or the VE.Bus Smart dongle.

Remote configuring and monitoring:
Install a Cerbo GX or other GX product to connect to the internet.
Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of
charge.
When connected to the internet, systems can be accessed remotely, and settings can be change