TriStar
Manufacturer Part Number: TS-M-2
Morningstar’s TriStar Meter-2 (TS-M-2) advanced digital meter that may be used with any TriStar solar controller.
TS-RM-2 mounting plate dimensions | 116 x 116 mm (4.56 x 4.56”) |
Plate material | powder coated steel |
Meter weight | TS-M-2 0.23 kg / 0.5 lb TS-RM-2 0.18 kg / 0.4 lb |
Connector type | RJ-11 (6-pin) |
TS-M-2 cable | 0.13 m / 5 in - 6 conductor |
TS-RM-2 cable | 30 m / 98.4 ft - 6 conductor |
Cable temperature | 60°C rating |
The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance. It is worth the time getting to know your meter!
The TriStar meters are 2 x 16 character LCD’s that display extensive system and controller information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguese or Spanish languages.
In multi-controller systems the TS-M-2 and TS-RM-2 are networkable using Morningstar’s MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter.
Battery voltage, charge/load current, battery temperature, TriStar heatsink temperature, PWM duty cycle, PV/load voltage, and all TriStar alarms or faults.
Battery voltage, Relay Driver temperature, input voltages from other sources.
The four channels provide up to four high level system control functions at a lower cost compared to other alarm and generator start packages.
Each channel has complete electronic protections for high reliability.
The system designer may choose the exact relay needed for each application including a wide range of current ratings and solid state, mechanical or mercury displacement relays.
It is easy to program the Relay Driver with the included PC software via serial RS-232 port connection. Data is stored in non-volatile memory. The Relay Driver is pre-programmed with four commonly used settings.
Provides flexible parameters to control one, two or three-wire generator schemes and complete control of preheat, crank, ignition and cool-down.
Each relay driver output may be controlled directly by MODBUS commands via the RS-232 for use with PLC’s and other industrial hardware. Mounts to a DIN rail or a flat surface.
Displays power and status of each channel as well as faults and data sampling intervals.