Surrette's "Dual Container" Construction More Power - Less Weight
Supplied in a Dual Non-Breakable Container, the new design eliminates breakage due to rough handling and abuse. Repairs are simpler and less time consuming. Short circuits from water, dirt, and falling metal objects are eliminated due to a moisture tight protective outer cover.
Environmentally Friendly No Acid Leakage
The new generation of batteries utilizes dual container construction. Each cell is assembled in its own inner container made of high temperature retardant, durable polypropylene with the inner cover heat bonded to the container,(thus acid leakage is eliminated). The cells are then assembled into a high density tough polyethylene outer container with a removable lid. Even if the outer container were to break the battery would still be operable without the harmful affects of sulfuric acid spills.
Optional Cell Connection
Cell replacement is now less frequent, but if necessary, Surrette makes it clean and quick. As an option the individual cells can be bolted together allowing the battery to be repaired, or assembled on location. Cell replacement can be accomplished without special skills or tools.
Enveloped Positive Plates
The positive plates are doubled insulated. The first layer consists of a thick woven glass mat. The plate and matting are then sealed in a non-destructible, microporous, polyethylene envelope. The envelope eliminates the possibility of separator misalignment, cracked separators, treeing, or shorting at the bottom or sides. The sediment chamber is eliminated allowing more liquid space above the top of the cell, thus lengthening periods between watering.
Rugged Plate Construction
The Rezistox Plate Design uses fewer, but heavier, members in the grid (current carrying conductor). More metal where it counts. The heavier members offer more resistance to positive grid peroxidization (corrosion), and allow for greater percentage of power producing active material. (The grid and active material are referred to as the plate.)
Series 5000 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 20 years of life thanks in part to their "Non-Breakable", dualcontainer (modular) construction.
Series | Model | Plates & Code | Warranty | Capacity 1.75 VPC | Length | Width | Height | Weight (Wet) |
||
---|---|---|---|---|---|---|---|---|---|---|
100 hr | 72 hr | 20 hr | ||||||||
4000 | 6 HHG 31P | 31 HHG | 7 yrs | 458 | 433 | 344 | 20 3/4" 52.71 cm |
8" 20.32 cm |
11 7/8" 30.16 cm |
125 lbs 56.70 kg |
4000 | 6 EHG 31P | 31 EHG | 7 yrs | 545 | 517 | 410 | 20 3/4" 52.71 cm |
8" 20.32 cm |
12 3/4" 32.36 cm |
133 lbs 60.32 kg |
5000 | 6 CS 17P | 17 CS | 10 yrs | 770 | 726 | 546 | 22" 55.88 cm |
8 1/4" 21.96 cm |
18 1/4" 46.35 cm |
221 lbs 100.24 kg |
5000 | 6 CS 21P | 21 CS | 10 yrs | 963 | 908 | 683 | 22" 55.88 cm |
9 3/4" 24.77 cm |
18 1/4" 46.35 cm |
271 lbs 122.92 kg |
5000 | 6 CS 25P | 25 CS | 10 yrs | 1156 | 1091 | 820 | 22" 55.88 cm |
11 1/4" 28.58 cm |
18 1/4" 46.35 cm |
318 lbs 144.24 kg |