MNPV6-DISCO  Solar Combiner Box

The MNPV6 Disco combiner is rated for outdoor use. Designed for combining PV strings up to 150VDC, 120 amps total output.

Features:

• Convenient disconnect handle
• All aluminum powder coated housing that won't rust
• Flip up cover that can stay in the open position during install
• PV Negative bus bar with 14 useable openings (10#14-6 and 4#1/0-14)
• Chassis ground bus bar with 14 useable openings (10#14-6 and 4#1/0-14)
• Standard din rail to mount up to 6,150V or 3,300V breakers
• 120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
• Dead front cover snaps into place after wiring is complete for safety
• Knockouts for PV in and PV out on bottom and sides
• Top surface is available to bring conduit in from directly above the enclosure
• Five year warranty

MNPV6-DISCO Spec Sheet

A requirement included in the 2015 Canadian Electric Code is that PV array's can be shutdown and depowered on site by firefighters. The solar PV array must be made safe to work around under all conditions. This includes shutting off power that normally runs from the PV modules on the roof down to the inverter.