Magnum Energy 2500 Watt 12V Inverter/120 Amp PFC Charger

Introducing the Magnum Energy ME Series Inverter/Charger. The ME Series Inverter/Charger from Magnum Energy is a modified sine wave inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.

It is easy to use and very easy to install. Install the ME Series inverter in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy to reach terminal block, connect the batteries, and switch on the power.

Inverter Specifications:

• Input battery voltage range: 9 to 16 VDC
• Nominal AC output voltage: 120 VAC ± 5%
• Output frequency and accuracy: 60 Hz ± 0.1%
• 1 msec surge current (amps AC): 100
  
• 100 msec surge current (amps AC): 45
  
• 5 sec surge power (real watts): 5000
• 30 sec surge power (real watts): 4500
• 5 min surge power (real watts): 3500
  
• 30 min surge power (real watts): 2900
• Continuous power output at 45° C: 2500 VA
• Maximum continuous input current: 5 AAC
• Rated input battery current: 333 ADC
• Inverter efficiency (peak): 91%
• Transfer time: 16 msecs
• Search mode (typical): 5 watts
  
• No load (120 VAC output): 23 watts
  
• Waveform: Modified Sine Wave

Charger Specifications:

• Continuous output at 45° C: 120 ADC
• Charger efficiency: 85%
• Power factor: > 0.95
• Input current at rated output (AC amps): 18

General Features and Capabilities:

Transfer relay capability: 2 legs at 30A for 120V/30A or 240V/60A service

Five stage charging capability: Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ 

 Battery temperature compensation: Yes, 15 ft Battery Temp Sensor standard 

Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans

Over current protection: Yes, with two overlapping circuits

Over temperature protection: Yes on transformer, MOSFETS, and battery

Conformal coating on PCB's for corrosion protection: Yes

Powder coated chassis & top for corrosion protection: Yes

Stainless steel fasteners for corrosion protection: Yes

Warranty: Three years

Physical Specifications:

Dimensions  (h x w x d): 13.75" x 12.65" x 8.0"

Mounting: Shelf (top or bottom up) or bulkhead (vents up)

Weight: 41 lb / 18.6 kg

Max operating altitude: 15,000' (4570 m)

Manufacturer Data Sheet